Como instalar o tubo de aquecimento

As an electric heating element, people often ask about the installation method and precautions of the heating tube. In fact, according to its type and installation environment, its installation method and precautions are also different. On the one hand, it depends on the life of the heating tube itself, and on the other hand, it depends on the installation of the heating tube in the electric heating Equipamento . Então vamos dar uma olhada nos requisitos básicos no processo de instalação do tubo de aquecimento .

Os requisitos básicos para a instalação de tubos de aquecimento são os seguintes:

1. Verifique se a temperatura do forno é distribuída uniformemente . se estiver instalada no forno de um forno de temperatura média ou de um forno de alta temperatura, quando a altura do forno é muito baixa, é melhor instalar o tubo de aquecimento na parte superior ou porta do forno.

2. For the three types of heating tubes, the filamentary corrugated type, the belt-shaped corrugated type and the filamentary spiral type, from the perspective of service life, the filamentary corrugated type is better, the belt-shaped corrugated type is second, and the filamentary spiral type is the worst, and the corrugated filamentary electric heating tube has better heat exchange conditions.
3. The installation position of the heating tube should be able to simply transfer heat to the workpiece without overheating the workpiece part, so the radiation shielding between the heating tubes and between the heating tubes and the furnace wall support bricks should be reduced. 4. If it is a medium-temperature furnace, high-aluminum finished heating tubes should be selected, and low-temperature furnaces can use ordinary clay finished products. 5. The common installation method of single-head heating tubes is to install them directly on the bracket or by welding. 6. L-shaped single-head heating tubes are generally used in the environment where they can be directly inserted and do not need to be fixed. 7. Baffle-type heating tubes can be used directly or welded and fixed on the basis of the baffle. 8. Threaded single-head heating tubes are mainly screwed on the parts that need to be fixed. If there are strict requirements for sealing, welding is required on the original basis. 9. U-shaped heating tubes are generally equipped with fasteners and can be installed directly. Brackets or welding methods can also be Usado . 10. Flange Tubos de aquecimento elétrico são instalados e fixados de acordo com o método de instalação de flanges .